Forum für Wissenschaft, Industrie und Wirtschaft

Hauptsponsoren:     3M 
Datenbankrecherche:

 

HomeSonderthemenSonderthemenTechnologieangebote

Technologieangebote

News zu Technologieangeboten:

Seite anfang | 1 | 2 | 3 | 4 | 5 | ende

Sichten und Analysieren von großen Videodatenmengen im Bereich von Videoüberwachungen

Der erfindungsgemäße Prozess, der alle Stufen von der Datenakquisition über die Merkmalsextraktion bis hin zur Darstellung umfasst, kann eingesetzt werden, um große Videodatenmengen zu sichten und zu analysieren. Im Speziellen kann die Erfindung gerade im Bereich der Videoüberwachung verwendet werden, um übertragene Bilder in Echtzeit darzustellen und so den Betrachter bei der Analyse zu unterstützen. 20.02.2017 | nachricht Nachricht

Novel carbonization process of PAN-nanofiber mats with enhanced surface area and porosity

This innovative carbonization process of carbon precursor fibers creates in a fast and energy saving manner carbon fibers (CF) which are highly porous (small pore diameters from 0.1 to 10 nm) and have a high surface area (100 to 2500 m2/g). The pyrolysis step needs only minutes or even seconds. No additional additives like pore-providing templates, catalytic compounds or corrosive liquids are required. However, filler materials like pigments, dyes, graphene nanoplatelets or metal- and semiconductor nanoparticles can be admixed to vary the performance of the produced carbon fibers, e.g. to increase electrical conductivity. Overall, this technology combines conventional carbonization and activation treatments into one process and is more economical by saving time, costs and resources compared to already known thermal carbonization methods. Applications of carbon fibers are known in the art. Electric applications like super caps and electrodes or filtration and adsorption for gas, water and solvent purification might be preferable. 20.02.2017 | nachricht Nachricht

Parenteral controlled drug delivery - polymers

Parenteral controlled drug delivery is of crucial importance for the pharmacotherapy of many diseases (e.g. breast and prostate cancer, local inflammation). By means of controlled release systems it is possible to decrease the frequency of administration (from hours to months), to increase drug efficiency and to decrease side effects. The problem is solved by providing Direct Injectable Polymer Solutions (DIPOs) which act as a depot after administration. Their polarity and degradation rate is adjustable. They are much less acidic compared to PLA/PLGA polymers. 15.02.2017 | nachricht Nachricht

Low cost cloning

DNA assembly methods such as such as Gibson and Golden Gate cloning are basic tools for synthetic biology. Both methods allow assembly of constructs from multiple DNA fragments in a one-pot one-step assembly reaction. Standardization of parts is another essential element of modern synthetic biology. A novel method has been developed to assemble constructs from several individual DNA parts - each kept on a solid carrier - directly in a one-pot one-step reaction. 15.02.2017 | nachricht Nachricht

Parenteral controlled drug delivery - oleogels

Parenteral controlled drug delivery is of crucial importance for the pharmacotherapy of many diseases (e.g. breast and prostate cancer, local inflammation). By means of controlled release systems it is possible to decrease the frequency of administration (from hours to months), to increase drug efficiency and to decrease side effects. Direct Injectable OleoGels (DIOGs) and In Situ Forming OleoGels (ISFOGs) were developed as new, biodegradable and lipid based formulations for parenteral controlled release applications. Both formulations have many advantages in terms of manufacturability, rheological properties and release control compared to the currently used drug delivery systems. 15.02.2017 | nachricht Nachricht

Parenteral controlled drug delivery - polymers

Parenteral controlled drug delivery is of crucial importance for the pharmacotherapy of many diseases (e.g. breast and prostate cancer, local inflammation). By means of controlled release systems it is possible to decrease the frequency of administration (from hours to months), to increase drug efficiency and to decrease side effects. The problem is solved by providing Direct Injectable Polymer Solutions (DIPOs) which act as a depot after administration. Their polarity and degradation rate is adjustable. They are much less acidic compared to PLA/PLGA polymers. 10.02.2017 | nachricht Nachricht

MCR Dendrimers

Dendrimers are spherical, highly branched polymers used in the fields of drug delivery and drug targeting, DNA/RNA delivery, imaging, protein labelling, protein crosslinking and protein separation, coagulation inhibition, and surface, cell and tissue recognition. They are also used as macroamphiphiles and catalyst supports. All previously existing dendrimers require special, branched and partially protected or polyreactive building blocks for their synthesis. A disadvantage is the limited range of dendrimers with varying structures that can be produced, and the concentration to few dendron forming functional groups. The new technology offers the possibility of synthesising dendrimers with almost any combination of branch lengths, degree of branching, internal and terminal groups. This is achieved by means of multiple iterative multicomponent reactions, e.g. with acidic, alkaline, hydrophilic, lipophilic, sugar and other functional groups. 10.02.2017 | nachricht Nachricht

Low cost cloning

DNA assembly methods such as such as Gibson and Golden Gate cloning are basic tools for synthetic biology. Both methods allow assembly of constructs from multiple DNA fragments in a one-pot one-step assembly reaction. Standardization of parts is another essential element of modern synthetic biology. A novel method has been developed to assemble constructs from several individual DNA parts - each kept on a solid carrier - directly in a one-pot one-step reaction. 10.02.2017 | nachricht Nachricht

Parenteral controlled drug delivery - oleogels

Parenteral controlled drug delivery is of crucial importance for the pharmacotherapy of many diseases (e.g. breast and prostate cancer, local inflammation). By means of controlled release systems it is possible to decrease the frequency of administration (from hours to months), to increase drug efficiency and to decrease side effects. Direct Injectable OleoGels (DIOGs) and In Situ Forming OleoGels (ISFOGs) were developed as new, biodegradable and lipid based formulations for parenteral controlled release applications. Both formulations have many advantages in terms of manufacturability, rheological properties and release control compared to the currently used drug delivery systems. 10.02.2017 | nachricht Nachricht

Barley yellow mosaic virus

Yellow mosaic virus disease leads to substantial losses - up to 50 % of the yield - in susceptible barley varieties (Hordeum vulgare). The disease is caused by different strains of Barley yellow mosaic virus (BaYMV) and Barley mild mosaic virus (BaMMV). It cannot be cured by chemical treatment. The present invention provides a new recessive resistance gene. Variants of the gene lead to resistance against all agents known to cause yellow mosaic virus disease in Europe. 10.02.2017 | nachricht Nachricht
Seite anfang | 1 | 2 | 3 | 4 | 5 | ende

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: BAM@Hannover Messe: Innovatives 3D-Druckverfahren für die Raumfahrt

Auf der Hannover Messe 2018 präsentiert die Bundesanstalt für Materialforschung und -prüfung (BAM), wie Astronauten in Zukunft Werkzeug oder Ersatzteile per 3D-Druck in der Schwerelosigkeit selbst herstellen können. So können Gewicht und damit auch Transportkosten für Weltraummissionen deutlich reduziert werden. Besucherinnen und Besucher können das innovative additive Fertigungsverfahren auf der Messe live erleben.

Pulverbasierte additive Fertigung unter Schwerelosigkeit heißt das Projekt, bei dem ein Bauteil durch Aufbringen von Pulverschichten und selektivem...

Im Focus: BAM@Hannover Messe: innovative 3D printing method for space flight

At the Hannover Messe 2018, the Bundesanstalt für Materialforschung und-prüfung (BAM) will show how, in the future, astronauts could produce their own tools or spare parts in zero gravity using 3D printing. This will reduce, weight and transport costs for space missions. Visitors can experience the innovative additive manufacturing process live at the fair.

Powder-based additive manufacturing in zero gravity is the name of the project in which a component is produced by applying metallic powder layers and then...

Im Focus: IWS-Ingenieure formen moderne Alu-Bauteile für zukünftige Flugzeuge

Mit Unterdruck zum Leichtbau-Flugzeug

Ingenieure des Fraunhofer-Instituts für Werkstoff- und Strahltechnik (IWS) in Dresden haben in Kooperation mit Industriepartnern ein innovatives Verfahren...

Im Focus: Moleküle brillant beleuchtet

Physiker des Labors für Attosekundenphysik, der Ludwig-Maximilians-Universität und des Max-Planck-Instituts für Quantenoptik haben eine leistungsstarke Lichtquelle entwickelt, die ultrakurze Pulse über einen Großteil des mittleren Infrarot-Wellenlängenbereichs generiert. Die Wissenschaftler versprechen sich von dieser Technologie eine Vielzahl von Anwendungen, unter anderem im Bereich der Krebsfrüherkennung.

Moleküle sind die Grundelemente des Lebens. Auch wir Menschen bestehen aus ihnen. Sie steuern unseren Biorhythmus, zeigen aber auch an, wenn dieser erkrankt...

Im Focus: Molecules Brilliantly Illuminated

Physicists at the Laboratory for Attosecond Physics, which is jointly run by Ludwig-Maximilians-Universität and the Max Planck Institute of Quantum Optics, have developed a high-power laser system that generates ultrashort pulses of light covering a large share of the mid-infrared spectrum. The researchers envisage a wide range of applications for the technology – in the early diagnosis of cancer, for instance.

Molecules are the building blocks of life. Like all other organisms, we are made of them. They control our biorhythm, and they can also reflect our state of...

Alle Focus-News des Innovations-reports >>>

Anzeige

Anzeige

VideoLinks
Industrie & Wirtschaft
Veranstaltungen

infernum-Tag 2018: Digitalisierung und Nachhaltigkeit

24.04.2018 | Veranstaltungen

Fraunhofer eröffnet Community zur Entwicklung von Anwendungen und Technologien für die Industrie 4.0

23.04.2018 | Veranstaltungen

Mars Sample Return – Wann kommen die ersten Gesteinsproben vom Roten Planeten?

23.04.2018 | Veranstaltungen

VideoLinks
Wissenschaft & Forschung
Weitere VideoLinks im Überblick >>>
 
Aktuelle Beiträge

Von der Genexpression zur Mikrostruktur des Gehirns

24.04.2018 | Biowissenschaften Chemie

Bestrahlungserfolg bei Hirntumoren lässt sich mit kombinierter PET/MRT vorhersagen

24.04.2018 | Medizintechnik

RWI/ISL-Containerumschlag-Index auf hohem Niveau deutlich rückläufig

24.04.2018 | Wirtschaft Finanzen

Weitere B2B-VideoLinks
IHR
JOB & KARRIERE
SERVICE
im innovations-report
in Kooperation mit academics