Forum für Wissenschaft, Industrie und Wirtschaft

Hauptsponsoren:     3M 
Datenbankrecherche:

 

Siemens expands its range of products for cost-sensitive buyers

27.11.2012
New economical solutions for CT, MR, imaging IT and ultrasound presented at RSNA 2012

At the 98th Scientific Assembly and Annual Meeting of the Radiological Society of North America (RSNA) 2012 in Chicago, Siemens Healthcare presented new economical systems in computed tomography, magnetic resonance imaging, ultrasound, and an entry-level version of its imaging software syngo.via. These advanced systems feature excellent image quality, high process efficiency, and lower cost of ownership.

To address the challenges of increasing cost pressures on healthcare systems worldwide and simultaneously keep the level of diagnostics as high as possible, Siemens Healthcare had launched the global initiative Agenda 2013 in November 2011. It includes a range of new economical products referred to as "Accessible Innovations". Since launching Agenda 2013, Siemens has introduced under its Accessible Innovations banner numerous devices in nearly every imaging modality. At the RSNA 2012, Siemens' Accessible Innovations offerings will expand with the introduction of new systems in computed tomography, magnetic resonance imaging, ultrasound, and an entry-level version of its imaging software syngo.via.

Economical CT scanner Somatom Perspective available as 128- and 64-slice configurations

One year after unveiling the 128-slice configuration of the Somatom Perspective, Siemens Healthcare will present a 64-slice configuration of the scanner. A small footprint of just 18 square meters, a brief installation period of just one to two days, and low energy consumption and cooling needs make these two state-of-the-art scanners the most economic CTs in their class. The 64-slice Somatom Perspective is appropriate for use in outpatient environments and small to medium-sized hospitals where CT tasks focus on routine applications. The eMode feature – like in the 128-slice model – automatically optimizes the scanning parameters to run the equipment more efficiently, increase the life of the systems, and lower maintenance costs. Patients benefit from Safire, a solution to generate CT images using raw data based iterative reconstruction that can reduce radiation doses up to 60 percent or improve image quality. An onsite upgrade to the 128-slice configuration – allowing customers to expand their clinical portfolio – is possible at any time.

Latest MRI technology available at attractive total cost of ownership

After the recent introduction of the Magnetom Spectra – a magnetic resonance imaging (MRI) system with an attractive price-performance-ratio that facilitates access to high-quality 3 Tesla imaging – Siemens now also presents a new version of its Magnetom Essenza.* The established 1.5 Tesla system requires only low initial investment, while further savings of up to 25 percent can be attained on costs for space, power requirements and construction. Built with the experience of more than 1,000 customers in the field, the new Magnetom Essenza is for the first time equipped with Siemens' MRI workflow solution Dot (Day optimizing throughput),* which enables easy, fast selection of the best scan strategy based on the patient's condition and the clinical indication. Existing Magnetom Essenza systems can also be upgraded to Dot, while existing systems of the established Magnetom Verio 3T and Magnetom Avanto 1.5T can now be upgraded to Dot and Tim 4G, the latest generation of Tim (Total imaging matrix).* Based on ultra high-density coils combined with the highest channel configurations and a unique RF architecture, Tim 4G's benefits are exceptional image quality and faster image acquisition.

Advanced ultrasound technologies for improved cost-of-ownership

With the Acuson X700 ultrasound system, Siemens has developed a powerful system that offers exceptional image quality, robust technologies, and intelligent workflow solutions at an excellent price/performance ratio. Many advanced imaging technologies that were previously available only on high-end, higher-cost systems are now standard on the Acuson X700 system, including Dynamic TCE tissue contrast enhancement technology, which improves borders and reduces speckle/noise, facilitating subtle tissue differentiation. The Acuson X700 system also features intelligent workflow solutions that support workflow, ensure exam consistency, and enable high patient throughput. TGO tissue grayscale optimization technology provides instantaneous, one-button image optimization by automatically adjusting the image brightness to the tissue type being imaged. Moreover, the system features a new design for improved usability, including a 20-inch LED display. An integrated handle with articulating arm enables the user to easily position the monitor for comfortable viewing.

New entry-level solution of Siemens' proven imaging software syngo.via

With syngo.via Element, Siemens introduces an entry-level solution for 3D routine and advanced image reading. This software package is based on the latest version of the advanced multi-modality imaging software syngo.via and includes applications and functionalities specifically designed for reading CT studies, for example in neurology and oncology. Syngo.via Element is designed to meet the needs of specialized practices and community hospitals. In many cases, a practice may need to rely on some high-quality 3D visualization software applications, but may not require a full suite of syngo.via applications. Syngo.via Element is available with the Somatom Perspective and Somatom Emotion CT scanners from Siemens.

Launched in November 2011 by the Siemens Healthcare Sector, "Agenda 2013" is a two-year global initiative to further strengthen the Healthcare Sector's innovative power and competitiveness. Specific measures will be implemented in four fields of action: Innovation, Competitiveness, Regional Footprint, and People Development.

* The products/features are not commercially available. Due to regulatory reasons their future availability cannot be guaranteed.

The Siemens Healthcare Sectoris one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. Siemens Healthcare employs some 51,000 employees worldwide and operates around the world. In fiscal year 2012 (to September 30), the Sector posted revenue of 13.6 billion euros and profit of 1.8 billion euros. For further information please visit:http://www.siemens.com/healthcare

The products mentioned here are not commercially available in all countries. Due to regulatory reasons the future availability in any country cannot be guaranteed. Further details are available from the local Siemens organizations.

The statements described herein are based on results that were achieved in the customer's unique setting. Since there is no "typical" hospital and many variables exist (e.g., hospital size, case mix, level of IT adoption) there can be no guarantee that other customers will achieve the same results.

Reference Number: H201211008e

Contact
Mr. Sonja Fischer
Healthcare Sector
Siemens AG
Henkestr. 127
91052 Erlangen
Germany
Tel: +49 (9131) 84-6188
sonja.sf.fischer@siemens.com

Sonja Fischer | Siemens Healthcare
Further information:
http://www.siemens.com/healthcare

More articles from Health and Medicine:

nachricht Nanotubes are beacons in cancer-imaging technique
23.05.2016 | Rice University

nachricht More light on cancer
20.05.2016 | Lomonosov Moscow State University

All articles from Health and Medicine >>>

The most recent press releases about innovation >>>

Die letzten 5 Focus-News des innovations-reports im Überblick:

Im Focus: Computational High-Throughput-Screening findet neue Hartmagnete die weniger Seltene Erden enthalten

Für Zukunftstechnologien wie Elektromobilität und erneuerbare Energien ist der Einsatz von starken Dauermagneten von großer Bedeutung. Für deren Herstellung werden Seltene Erden benötigt. Dem Fraunhofer-Institut für Werkstoffmechanik IWM in Freiburg ist es nun gelungen, mit einem selbst entwickelten Simulationsverfahren auf Basis eines High-Throughput-Screening (HTS) vielversprechende Materialansätze für neue Dauermagnete zu identifizieren. Das Team verbesserte damit die magnetischen Eigenschaften und ersetzte gleichzeitig Seltene Erden durch Elemente, die weniger teuer und zuverlässig verfügbar sind. Die Ergebnisse wurden im Online-Fachmagazin »Scientific Reports« publiziert.

Ausgangspunkt des Projekts der IWM-Forscher Wolfgang Körner, Georg Krugel und Christian Elsässer war eine Neodym-Eisen-Stickstoff-Verbindung, die auf einem...

Im Focus: University of Queensland: In weniger als 2 Stunden ans andere Ende der Welt reisen

Ein internationales Forschungsteam, darunter Wissenschaftler der University of Queensland, hat im Süden Australiens einen erfolgreichen Hyperschallgeschwindigkeitstestflug absolviert und damit futuristische Reisemöglichkeiten greifbarer gemacht.

Flugreisen von London nach Sydney in unter zwei Stunden werden, dank des HiFiRE Programms, immer realistischer. Im Rahmen dieses Projekts werden in den...

Im Focus: Computational high-throughput screening finds hard magnets containing less rare earth elements

Permanent magnets are very important for technologies of the future like electromobility and renewable energy, and rare earth elements (REE) are necessary for their manufacture. The Fraunhofer Institute for Mechanics of Materials IWM in Freiburg, Germany, has now succeeded in identifying promising approaches and materials for new permanent magnets through use of an in-house simulation process based on high-throughput screening (HTS). The team was able to improve magnetic properties this way and at the same time replaced REE with elements that are less expensive and readily available. The results were published in the online technical journal “Scientific Reports”.

The starting point for IWM researchers Wolfgang Körner, Georg Krugel, and Christian Elsässer was a neodymium-iron-nitrogen compound based on a type of...

Im Focus: Mit atomarer Präzision: Technologien für die übernächste Chipgeneration

Im Projekt »Beyond EUV« entwickeln die Fraunhofer-Institute für Lasertechnik ILT in Aachen und für angewandte Optik und Feinmechanik IOF in Jena wesentliche Technologien zur Fertigung einer neuen Generation von Mikrochips mit EUV-Strahlung bei 6,7 nm. Die Strukturen sind dann kaum noch dicker als einzelne Atome und ermöglichen besonders hoch integrierte Schaltkreise zum Beispiel für Wearables oder gedankengesteuerte Prothesen.

Gordon Moore formulierte 1965 das später nach ihm benannte Gesetz, wonach sich alle ein bis zwei Jahre die Komplexität integrierter Schaltungen verdoppelt. Er...

Im Focus: Ein negatives Enzym liefert positive Resultate

In den letzten zwanzig Jahren hat die Chemie viele wichtige Instrumente und Verfahren für die Biologie hervorgebracht. Heute können wir Proteine herstellen, die in der Natur bisher nicht vorkommen. Es lassen sich Bilder von Ausschnitten lebender Zellen aufnehmen und sogar einzelne Zellen in lebendigen Tieren beobachten. Diese Woche haben zwei Forschungsgruppen der Universitäten Basel und Genf, die beide dem Nationalen Forschungsschwerpunkt Molecular Systems Engineering angehören, im Forschungsmagazin «ACS Central Science» präsentiert, wie man ein nicht-natürliches Protein designt, das völlig neue Fähigkeiten aufweist.

Proteine sind die Arbeitspferde jeder Zelle. Sie bestehen aus Aminosäurebausteinen, die als Kette verbunden sind, welche sich zu funktionalen Maschinen...

Alle Focus-News des Innovations-reports >>>

Anzeige

Anzeige

IHR
JOB & KARRIERE
SERVICE
im innovations-report
in Kooperation mit academics
Veranstaltungen

DFG unterstützt Kongresse und Tagungen - Juli 2016

25.05.2016 | Veranstaltungen

"European Conference on Modelling and Simulation" an der OTH Regensburg

25.05.2016 | Veranstaltungen

Fachtagung »Magnetwerkstoffe und Seltene Erden«

25.05.2016 | Veranstaltungen

 
B2B-VideoLinks
Weitere VideoLinks >>>
Aktuelle Beiträge

ILA 2016: Additive Produktion ­einsatzfähiger Bauteile durch effiziente Prozessketten

25.05.2016 | Messenachrichten

Reliable in-line inspections of high-strength automotive body parts within seconds

25.05.2016 | Messenachrichten

Wie Zellen Barrieren überwinden

25.05.2016 | Förderungen Preise