A new study describes the use of a kind of molecular scissors to cut and paste a series of HIV-resistant genes into T cells, specialized immune cells targeted by the AIDS virus. The genome editing was made in a gene that the virus uses to gain entry into the cell.
By inactivating a receptor gene and inserting additional anti-HIV genes, the virus was blocked from entering the cells, thus preventing it from destroying the immune system, said Matthew Porteus, MD, an associate professor of pediatrics at Stanford and a pediatric hematologist/oncologist at Lucile Packard Children's Hospital.
"We inactivated one of the receptors that HIV uses to gain entry and added new genes to protect against HIV, so we have multiple layers of protection — what we call stacking," said Porteus, the study's principal investigator. "We can use this strategy to make cells that are resistant to both major types of HIV."
He said the new approach, a form of tailored gene therapy, could ultimately replace drug treatment, in which patients have to take multiple medications daily to keep the virus in check and prevent the potentially fatal infections wrought by AIDS. The work was done in the laboratory, and clinical trials would still be needed to determine whether the approach would work as a therapy.
"Providing an infected person with resistant T cells would not cure their viral infection," said Sara Sawyer, PhD, assistant professor of molecular genetics and microbiology at the University of Texas-Austin and a co-author of the study. "However, it would provide them with a protected set of T cells that would ward off the immune collapse that typically gives rise to AIDS."
The study will be published in the Jan. 22 issue of Molecular Therapy.
One of the big challenges in treating AIDS is that the virus is notorious for mutating, so patients must be treated with a cocktail of drugs — known as highly active antiretroviral therapy or HAART — which hit it at various stages of the replication process. The researchers were able to get around that problem with a new, multi-pronged genetic attack that blocks HIV on several fronts. Essentially, they hope to mimic HAART through genetic manipulation.
The technique hinges on the fact that the virus typically enters T cells by latching onto one of two surface proteins known as CCR5 and CXCR4. Some of the latest drugs now used in treatment work by interfering with these receptors' activity. A small number of people carry a mutation in CCR5 that makes them naturally resistant to HIV. One AIDS patient with leukemia, now famously known as the Berlin patient, was cured of HIV when he received a bone marrow transplant from a donor who had the resistant CCR5 gene.
Scientists at Sangamo BioSciences in Richmond, Calif., have developed a technique using a protein that recognizes and binds to the CCR5 receptor gene, genetically modifying it to mimic the naturally resistant version. The technique uses a zinc finger nuclease, a protein that can break up pieces of DNA, to effectively inactivate the receptor gene. The company is now testing its CCR5-resistant genes in phase-1 and -2 trials with AIDS patients at the University of Pennsylvania.
The Stanford scientists used a similar approach but with an added twist. They used the same nuclease to zero in on an undamaged section of the CCR5 receptor's DNA. They created a break in the sequence and, in a feat of genetic editing, pasted in three genes known to confer resistance to HIV, Porteus said. This technique of placing several useful genes at a particular site is known as "stacking."
Incorporating the three resistant genes helped shield the cells from HIV entry via both the CCR5 and CXCR4 receptors. The disabling of the CCR5 gene by the nuclease, as well as the addition of the anti-HIV genes, created multiple layers of protection.
Blocking HIV infection through both the CCR5 and CXCR4 receptors is important, Porteus said, as it hasn't been achieved before by genome editing. To test the T cells' protective abilities, the scientists created versions in which they inserted one, two and all three of the genes and then exposed the T cells to HIV.
Though the T cells with the single- and double-gene modifications were somewhat protected against an onslaught of HIV, the triplets were by far the most resistant to infection. These triplet cells had more than 1,200-fold protection against HIV carrying the CCR5 receptor and more than 1,700-fold protection against those with the CXCR4 receptor, the researchers reported. The T cells that hadn't been altered succumbed to infection with 25 days.
Porteus said he views the work as an important step forward in developing a gene therapy for HIV.
"I'm very excited about what's happened already," he said. "This is a significant improvement in that first-generation application."
He said a potential drawback of the strategy is that while the nuclease is designed to create a break in one spot, it could possibly cause a break elsewhere, leading to cancer or other cell aberration. He said it's also possible the cells may not tolerate the genetic change.
"It's possible the cells won't like the proteins they're asked to express, so they won't grow," he said.
But he said he believes both problems are technically surmountable. He said the researchers' next step is to test the strategy in T cells taken from AIDS patients, and then move on to animal testing. He said he hopes to begin clinical trials within three to five years.
Though the method is labor-intensive, requiring a tailored approach for each patient, it would save patients from a lifelong dependence on antiretroviral drugs, which have adverse side effects, Porteus noted.
He said he also hopes to adapt these techniques for use against other diseases, such as sickle cell anemia, one of his areas of interest. Porteus works with patients in the Pediatric Bone Marrow Transplant service at Packard Children's.In addition to Sawyer, he collaborated with Richard Voit, a former Stanford graduate student who is now an MD/PhD candidate at the University of Texas Southwestern Medical Center, and Moira McMahon, PhD, a former postdoctoral scholar at Stanford who is now at the University of California-San Diego.
Information about Stanford's Department of Pediatrics, which also supported the work, is available at http://pediatrics.stanford.edu.
The Stanford University School of Medicine consistently ranks among the nation's top medical schools, integrating research, medical education, patient care and community service. For more news about the school, please visit http://mednews.stanford.edu. The medical school is part of Stanford Medicine, which includes Stanford Hospital & Clinics and Lucile Packard Children's Hospital. For information about all three, please visit http://stanfordmedicine.org/about/news.html.
Ruthann Richter | EurekAlert!
Atomic-level motion may drive bacteria's ability to evade immune system defenses
24.04.2017 | Indiana University
Two-dimensional melting of hard spheres experimentally unravelled after 60 years
24.04.2017 | University of Oxford
Physiker der Universität Bielefeld und der norwegischen Universität Tromsø haben einen Chip entwickelt, der super-auflösende Lichtmikroskopie, auch...
Im 3-D-Druckverfahren durch Direktes Laserschreiben können Mikrometer-große Strukturen mit genau definierten Eigenschaften geschrieben werden. Forscher des Karlsruher Institus für Technologie (KIT) haben ein Verfahren entwickelt, durch das sich die 3-D-Tinte für die Drucker wieder ‚wegwischen‘ lässt. Die bis zu hundert Nanometer kleinen Strukturen lassen sich dadurch wiederholt auflösen und neu schreiben - ein Nanometer entspricht einem millionstel Millimeter. Die Entwicklung eröffnet der 3-D-Fertigungstechnik vielfältige neue Anwendungen, zum Beispiel in der Biologie oder Materialentwicklung.
Beim Direkten Laserschreiben erzeugt ein computergesteuerter, fokussierter Laserstrahl in einem Fotolack wie ein Stift die Struktur. „Eine Tinte zu entwickeln,...
Immer mehr Autobauer setzen auf Karosserieteile aus kohlenstofffaserverstärktem Kunststoff (CFK). Dennoch müssen Fertigungs- und Reparaturkosten weiter gesenkt werden, um CFK kostengünstig nutzbar zu machen. Das Laser Zentrum Hannover e.V. (LZH) hat daher zusammen mit der Volkswagen AG und fünf weiteren Partnern im Projekt HolQueSt 3D Laserprozesse zum automatisierten Besäumen, Bohren und Reparieren von dreidimensionalen Bauteilen entwickelt.
Automatisiert ablaufende Bearbeitungsprozesse sind die Grundlage, um CFK-Bauteile endgültig in die Serienproduktion zu bringen. Ausgerichtet an einem...
More and more automobile companies are focusing on body parts made of carbon fiber reinforced plastics (CFRP). However, manufacturing and repair costs must be further reduced in order to make CFRP more economical in use. Together with the Volkswagen AG and five other partners in the project HolQueSt 3D, the Laser Zentrum Hannover e.V. (LZH) has developed laser processes for the automatic trimming, drilling and repair of three-dimensional components.
Automated manufacturing processes are the basis for ultimately establishing the series production of CFRP components. In the project HolQueSt 3D, the LZH has...
Reflecting the structure of composites found in nature and the ancient world, researchers at the University of Illinois at Urbana-Champaign have synthesized thin carbon nanotube (CNT) textiles that exhibit both high electrical conductivity and a level of toughness that is about fifty times higher than copper films, currently used in electronics.
"The structural robustness of thin metal films has significant importance for the reliable operation of smart skin and flexible electronics including...
25.04.2017 | Veranstaltungen
24.04.2017 | Veranstaltungen
24.04.2017 | Veranstaltungen
25.04.2017 | Biowissenschaften Chemie
25.04.2017 | Veranstaltungsnachrichten
24.04.2017 | Unternehmensmeldung